[X] My Assistant

Ok, let's try this again...

 HVEquipComparison_0.6.4.2.zip ( 22.55k ) Number of downloads: 193


Did a much more thorough check this time, and found more glaring errors...that'll teach me not to verify my results better before publishing... (IMG:[invalid] style_emoticons/default/unsure.gif)

* 0.6.4.2
- Fixed a bunch of regressions in the form of missing/misplaced data (sorry!).

* 0.6.4.1
- Update to Wiki Ranges data (21 January 2015)
- Stat list now includes "Attack Crit Damage" and "Spell Crit Damage" data, though neither are used yet.

(Posting both changelog entries here since I'd rather not admit that the version in the last post was a thing...)

Peerless stuff seems to show properly now (those S-xx values were caused by missing data), though a few LMax values still show up like before; dunno if it's due to bad wiki values or some rounding in the script, but it shouldn't be related to my changes; all instances I've seen are where LMax <= 0.02 points off of Peerless, and the equip has a value of LMax + 0.01, which is also Peerless - 0.01.

Again, feedback is appreciated, as well as reports of breakage.

Working properly this time. (IMG:[invalid] style_emoticons/default/smile.gif)

I'm curious if anybody can help me, i have a 5 button mice (forward/back on the left side) and i'd like to know how can i bind exactly those two buttons for example in HV keybinds?

Stupid Google Chrome hates all of these scripts, man (IMG:[invalid] style_emoticons/default/mad.gif)

Stupid Google Chrome hates all of these scripts, man (IMG:[invalid] style_emoticons/default/mad.gif)

Yeah, they're making it much more difficult for powerusers to customize Chrome in exchange for making it very slightly more difficult for malware to gain control of the browser.

Either use an old release of Chrome that still allows userscripts, or use Iron instead. Don't use Tampermonkey.

Don't use Tampermonkey.

Interesting, why is that? (Just curious, not that I'm a Chrome user.)

Interesting, why is that? (Just curious, not that I'm a Chrome user.)

After playing for a few rounds, it will gradually keep increasing memory usage. After a battle series or two, your maximum possible turns/second could have gone down by half, depending on how good your computer is. (I remember playing To Kill a God and at the end Tampermonkey was using more than 300k memory, starting from around 20k at the beginning) Nothing solves it except closing and re-opening the browser, which is doable, but quite annoying when you have to do it every single time to maintain a decent speed. (The issue occurs even if you're only using the most basic of scripts, eg keybinds)

At least, that's how it was when I was using the latest version of TM on the latest version of Chrome. Using outdated versions of either may solve the problem, but I just gave up and moved to Iron for more speed/less Google/built-in userscript support. Tampermonkey would be great for quick script editing, but using it with HV apparently results in some sort of memory leak.

Tampermonkey was using more than 300k memory, starting from around 20k at the beginning

hmm i think you mean 300m & 20m?

At least, that's how it was when I was using the latest version of TM on the latest version of Chrome. Using outdated versions of either may solve the problem, but I just gave up and moved to Iron for more speed/less Google/built-in userscript support. Tampermonkey would be great for quick script editing, but using it with HV apparently results in some sort of memory leak.

i see. too bad there seems no other script manager extensions for Chrome-based browsers except TM.

This post has been edited by djackallstar: Mar 15 2015, 07:09

hmm i think you mean 300m & 20m?

Oh right. I forgot the memory displayed is in k, not ordinary units.

Is there any script about we can see more than one page in Sent page within MoogleMail?
I mean don't need to press ten times Older to check back the mail sent

Is there any script about we can see more than one page in Sent page within MoogleMail?
I mean don't need to press ten times Older to check back the mail sent

I don't know about everything on one page, but it would be quite simple to create links so all you need to do is control-click for however many pages you wish to load, and they'll all come up in 3 seconds (no need to press Older at all) - although they'll be in separate tabs. Would that work, or do you absolutely need everything on one page?

Is there any script about we can see more than one page in Sent page within MoogleMail?
I mean don't need to press ten times Older to check back the mail sent

oohmrparis has written a script that auto-loads the second page when one is on the first page of arenas,
so maybe you could ask him to make his script work on MM?
Another solution could be using AutoPager or AutoPagerize, just add the rules you define and it's done. (Though, they are addons, not userscripts.)
By using AutoPager or the likes you don't need to click anything any more, all you need to do is scroll down the page.
How they work:
(IMG:[autopagerize.net] http://autopagerize.net/img/ap_fig_h275.png)

This post has been edited by djackallstar: Mar 15 2015, 09:22

I don't know about everything on one page, but it would be quite simple to create links so all you need to do is control-click for however many pages you wish to load, and they'll all come up in 3 seconds (no need to press Older at all) - although they'll be in separate tabs. Would that work, or do you absolutely need everything on one page?

oohmrparis has written a script that auto-loads the second page when one is on the first page of arenas,
so maybe you could ask him to make his script work on MM?
Another solution could be using AutoPager or AutoPagerize, just add the rules you define and it's done. (Though, they are addons, not userscripts.)
By using AutoPager or the likes you don't need to click anything any more, all you need to do is scroll down the page.
How they work:
(IMG:[autopagerize.net] http://autopagerize.net/img/ap_fig_h275.png)

I think I will try the AutoPager or AutoPagerize later on, it seems fit me, thanks both of you

This post has been edited by showoff: Mar 15 2015, 10:55

Since I'm using Iron, I can only use Autopagerize, but it requires me to add the hv site into its database....
How can I register member to deal with it:wacko:
[autopagerize.jottit.com] http://autopagerize.jottit.com/registermember

Since I'm using Iron, I can only use Autopagerize, but it requires me to add the hv site into its database....
How can I register member to deal with it:wacko:
[autopagerize.jottit.com] http://autopagerize.jottit.com/registermember

Back when AutoPagerize was still a userscript, I could add rules by editing its source code (.user.js).
After some time the author changed it from a userscript to an extension, and that's when I started to use AutoPager.
Adding rules in AutoPager is a no-brainer compared to AutoPagerize, you don't even need to edit the source code.
I just checked AutoPager's website, it has a Chrome version, how about trying it first? Here is the link:
[www.teesoft.info] http://www.teesoft.info/content/view/107/1/lang,en/

This post has been edited by djackallstar: Mar 15 2015, 12:08

Back when AutoPagerize was still a userscript, I could add rules by editing its source code (.user.js).
After some time the author changed it from a userscript to an extension, and that's when I started to use AutoPager.
Adding rules in AutoPager is a no-brainer compared to AutoPagerize, you don't even need to edit the source code.
I just checked AutoPager's website, it has a Chrome version, how about trying it first? Here is the link:
[www.teesoft.info] http://www.teesoft.info/content/view/107/1/lang,en/

Isn't it still need to update the rules online?
I search [ap.teesoft.info] Here but nothing, when I browsing MM, it still has no popup or anything appear, may I ask how to start with using it (IMG:[invalid] style_emoticons/default/heh.gif)

Isn't it still need to update the rules online?
I search [ap.teesoft.info] Here but nothing, when I browsing MM, it still has no popup or anything appear, may I ask how to start with using it (IMG:[invalid] style_emoticons/default/heh.gif)

You'll have to add rules if none exists in the default database.
But now im stuck too (IMG:[invalid] style_emoticons/default/heh.gif)
After manually adding the rules by myself the next pages won't load at all, can those good at XPath throw some light on the problem?
(IMG:[i.imgur.com] http://i.imgur.com/uzo7J4G.png)

I wish I could use CSS selectors...

This post has been edited by djackallstar: Mar 15 2015, 15:14

You'll have to add rules if none exists in the default database.
But now im stuck too (IMG:[invalid] style_emoticons/default/heh.gif)
After manually adding the rules by myself the next pages won't load at all, can those good at XPath throw some light on the problem?
(IMG:[i.imgur.com] http://i.imgur.com/uzo7J4G.png)

I wish I could use CSS selectors...

So sad (IMG:[invalid] style_emoticons/default/anime_cry.gif)

 Moogle_Pager.user.zip ( 1.39k ) Number of downloads: 57

Chrome only.
If you want stop paging, click 'Page xxx'.

 Moogle_Pager.user.zip ( 1.39k ) Number of downloads: 57

Chrome only.
If you want stop paging, click 'Page xxx'.

Oh thank you oohmrparis! I've slightly modified it to suit my needs and it works well.
(IMG:[i.imgur.com] http://i.imgur.com/eHmLZeO.png)

 Moogle_Pager.user.zip ( 1.39k ) Number of downloads: 57

Chrome only.
If you want stop paging, click 'Page xxx'.

Awesome!! Thank you man!
One more question, how to change to load 5 more pages when I scroll down?
I tried to change 1 to 5 but failed (IMG:[invalid] style_emoticons/default/heh.gif)

(function() {
var pager = {
wait: true,
cnt: 2,
missCnt: 0,
set: function(url) {
var num = url.match(/\d+/);
this.next = document.querySelector('#mainpane > div > table');
this.url = /read/.test(url)? 'read&page=': 'sent&page=';
this.start = !num? 1: num * 1 + 1;
},

This post has been edited by showoff: Mar 17 2015, 05:38