[X] My Assistant

yes, its a recent update. i think the meaning of this is to disperse the static range to improve quality and speed.
(i use a 30mbps connection in few years ago and i received likely 4k static ranges at the peak, now im using 100mbps one but static ranges capped to 2785)

Even without speed restrictions, my earnings have been reduced by half, and I don't even try to get next year’s ranking medal. Especially during rush hour, my normal internet experience has already been affected without speed restrictions. I can’t imagine what it will be like after speed restrictions.
I'm not sure how good it will be for the site's operation, but at least the revenue should be guaranteed to be consistent with the original, so I have to think about whether I'll continue to run h@H next year or not. (IMG:[invalid] style_emoticons/default/huh.gif)

This is client 42432 from China. Last year 42432 has eat over 1.64TB, it always had 6000 static ranges (since 2022), is because HC？i worried that it will eat up my 3.84T SSD in 2024. The time which can get 3.84T ssd with 100 dollar has gone. or shall i click the button "allow removing static range if necessary"?

This post has been edited by A359004: Jan 4 2024, 13:33

This is client 42432 from China. Last year 42432 has eat over 1.64TB, it always had 6000 static ranges (since 2022), is because HC？i worried that it will eat up my 3.84T SSD in 2024.

Not sure exactly what you are asking, but you don't need more than a 3.84 TB SSD for H@H, and H@H does not do a lot of writes so write endurance isn't a real issue.

HC ranges are not assigned to clients located in China for capacity reasons.

Not sure exactly what you are asking, but you don't need more than a 3.84 TB SSD for H@H, and H@H does not do a lot of writes so write endurance isn't a real issue.

HC ranges are not assigned to clients located in China for capacity reasons.

sorry, i want to say that
"In the past year, my client has always had only 6000 static ranges, but the cache files have grown from 800G to over 1.6T. I want to know the possible reasons and how to slow down the cache growth."

"In the past year, my client has always had only 6000 static ranges, but the cache files have grown from 800G to over 1.6T. I want to know the possible reasons and how to slow down the cache growth."

You can set the maximum cache size on the settings page. You don't have to delete any static ranges unless you want it below 1.5 TB.

I am trying to download a gallery with H@H.
But it stuck because can not get one or two pages of the gallery.

Will the client keep retrying to download or it just stopped?

I am trying to download a gallery with H@H.
But it stuck because can not get one or two pages of the gallery.

Will the client keep retrying to download or it just stopped?

It'll retry up to a point before giving up.

It'll retry up to a point before giving up.

Any way to resume download?

My client 44663 failed to complete download this gallery.
But it stucked for missing 2 files (005.jpg 249.jpg)

I tried to Archive Download with H@H downloader many times.
But nothing happened. (IMG:[invalid] style_emoticons/default/anime_cry.gif)

Anyone know about tested max speed?

I posted here post 500

https://forums.e-hentai.org/index.php?s=&am...t&p=6406417

or is it working properly and It's just a location thing cus I know I can only have gigabit upload in slovakia and outside it's only vien and budapest where it can get high speeds

Any way to resume download?

My client 44663 failed to complete download this gallery.
But it stucked for missing 2 files (005.jpg 249.jpg)

I tried to Archive Download with H@H downloader many times.
But nothing happened. (IMG:[invalid] style_emoticons/default/anime_cry.gif)

If it's already partially downloaded, it will skip the existing files if you queue it up again, but if it's just a couple of files it's probably better to download them manually.

Anyone know about tested max speed?

or is it working properly and It's just a location thing cus I know I can only have gigabit upload in slovakia and outside it's only vien and budapest where it can get high speeds

Even if you have a gigabit connection, it doesn't necessarily mean that you see a full gigabit during testing. Depends on your ISP and location. But if you get 32 MB/s, it's not really a limiting factor.

If it's already partially downloaded, it will skip the existing files if you queue it up again, but if it's just a couple of files it's probably better to download them manually.
Even if you have a gigabit connection, it doesn't necessarily mean that you see a full gigabit during testing. Depends on your ISP and location. But if you get 32 MB/s, it's not really a limiting factor.

The problem is almost every download queues will be stuck for lack of 1~2 files.
This really makes me upset (IMG:[invalid] style_emoticons/default/mellow.gif)

So I found it's China firewall cause that.
IP ranges of some H@H server are blocked by government.

The only way is to add proxy for H@H client lol

This post has been edited by 工ロ魔人: Jan 22 2024, 16:24

I've made some tweaks to this on the backend, it should now cycle though all available servers for an image if it fails repeatedly. Doesn't mean that it will necessarily succeed in the end, but if at least one server isn't blocked, it should.

I've made some tweaks to this on the backend, it should now cycle though all available servers for an image if it fails repeatedly. Doesn't mean that it will necessarily succeed in the end, but if at least one server isn't blocked, it should.

tested on same gallery and it worked.
(IMG:[invalid] style_emoticons/default/wub.gif)

Heya! I see the minimum upload for speedtest is 80mbps up, but that's pretty much out of the range of most residential Australian internet plans. Is it worth applying anyway with 44, or not really?

Heya! I see the minimum upload for speedtest is 80mbps up, but that's pretty much out of the range of most residential Australian internet plans. Is it worth applying anyway with 44, or not really?

That's not enforced. I'm Australian and there are no residential speed plans that I can apply for that have 80mbit upload speeds, but I've been running H@H for nearly 8 years now at 20mbps upload speeds.

Also, if you want some of the benefits of running H@H (i.e unmetered archive downloads, daily login rewards) you can also just donate to the site and not bother spending money on hardware or bandwidth to run H@H. Donator's perks are actually better than H@H perks, at least in my case anyway. I know there are some people who earn lots of hath each day but I can only manage less than 3/day with my limited bandwidth.

This post has been edited by yetsun: Feb 9 2024, 14:37

That's not enforced. I'm Australian and there are no residential speed plans that I can apply for that have 80mbit upload speeds, but I've been running H@H for nearly 8 years now at 20mbps upload speeds.

Also, if you want some of the benefits of running H@H (i.e unmetered archive downloads, daily login rewards) you can also just donate to the site and not bother spending money on hardware or bandwidth to run H@H. Donator's perks are actually better than H@H perks, at least in my case anyway. I know there are some people who earn lots of hath each day but I can only manage less than 3/day with my limited bandwidth.

Yeah I was considering it for the Hath and to contribute back to the site, but even though I've got a decent fibre connection, it's not like I've got a proper server to leave on. Maybe donating would be better for all involved. Thanks for the info!

Heya! I see the minimum upload for speedtest is 80mbps up, but that's pretty much out of the range of most residential Australian internet plans. Is it worth applying anyway with 44, or not really?

May not be useful to the poster itself, but for readers of this topic, I will just remind them that 80mbps is 10 mBps. (IMG:[invalid] style_emoticons/default/lurk.gif)

Recently I got some conditions (VPN?Streaming?Tablet?Windows Scaling?Incompatible resolutions?) that cause H@H taskbar icon to fade out until becoming nearly invisible.
At that time, I realized another icon was also affected (but it got blurred instead of faded), of a program called Sandboxie Plus, which isn't made in Java, but is open source.

I'm not mentioning this directly for Tenboro, but for anybody possibly having time to try and figure what H@H and this program could have in common or similar that lead them to draw their taskbar icon in a distorted way.

I think the only other open source program displaying an icon in the taskbar, and that doesn't seem affected by a similar issue (though there's always the possibility of it because any change is just "less visible" on it?), is Open Hardware Monitor (not in Java either).

H@H doesn't draw the taskbar icon, that is fully handled by Java. So if it looks blurry, it's probably whatever version of Java not properly handling whatever resolution/DPI scaling/whatever combination you have.

Those recent version talks made me think of running a search, and I found something:
[bugs.openjdk.java.net] https://bugs.openjdk.java.net/browse/JDK-8255439 (it was a pain to load, hopefully it's the legit site (IMG:[invalid] style_emoticons/default/mellow.gif) )

Good news is it was updated 2 days ago after almost 10 months and the comment said it's a WIP, so it should be fixed eventually.
Bad news is that it's not fixed yet, and confirmed on versions up to 19 (while I'm still on 13 lol, that's why I thought on running a search in the first place).

I guess it's good to keep an eye on this (IMG:[invalid] style_emoticons/default/lurk.gif)

Meeting the "fading icon" issue again, today I downloaded OpenJDK 21.0.2.
I will try running H@H on it.
First attempt failed because a popup asking for firewall opening appeared, and by the time I allowed, the program had already failed.
But the 2nd attempt is running now, I will see how it goes.

edit: almost 24 hours in, with many system-breaking resolution changes, and so far the fading icon issue seems to be fixed. It probably doesn't require as much as I did by taking the latest Java version, but it's good to know things can work.

This post has been edited by uareader: Feb 15 2024, 09:51

44635 stucked with Timeout
Client has been shutdown but useless

44635 stucked with Timeout
Client has been shutdown but useless

If you did not shut it down properly and then try to start it up from a different IP, you may have to wait 24 hours before it can be restarted.