[X] My Assistant

Konpaku sauce, of course.
Seriously, ecchiverse needs a good and deep fixing, there's nothing working. I suppose i'll do it on saturday on something. I miss the pretty girls who were a bit everywhere.

Lv.475 (IMG:[invalid] style_emoticons/default/wub.gif)

foobar is good, extra good if you're willing to spend some time (several days to weeks) to tweak it
MPC-HC master race
foobar master race

@you
@scremaz

There is no worse player than one that needs external codec to work.

K-Lite Codec Pack in 2017? Guhhh

guess it would work the same if you assigned 001 and 002 as fixed and 003-255 as range, right? or is there a tendency for applications and devices to take the lowest one available?

Yes. It always uses the lowest number available.

There is no worse player than one that needs external codec to work.

MPC HC doesn't need extra codecs eh. It's pretty much instant noodles

MPC HC doesn't need extra codecs eh. It's pretty much instant noodles

indeed. i use it as portable in some PCs, on-the-fly.

Got a Gold Star.

edit: now to start filling up new Monster Slots...

This post has been edited by Ea-Moon: Sep 28 2017, 14:11

Got a Gold Star.

edit: now to start filling up new Monster Slots...

Congratulations!!

Got a Gold Star.

Graz. Welcome to the club. (IMG:[invalid] style_emoticons/default/happy.gif)

Thanks!

It sure shows on the amount of EXP I just got from an RE...

How does your CPU usage increase that much just by listening to music

These 50% that I referred to is the maximum peak that can occur in an instant. Usually it varies between 20% and 40%. Also, sometimes I leave more than one open tab in the browser, or else I open the notepad and the calculator.

Might be due to shitty player like itunes etc.

I still use the good old Winamp. (IMG:[invalid] style_emoticons/default/happy.gif) I like the options the program has, in addition to being accustomed for several years.

Your RAM is like mine: 4GB enough to run a computer with W7, but not enough so that W7 does't mess with it (and the hard drive) constantly. Only these three softwares is OK. You may have not turned off some of the nasty services, like the search indexer ("Windows Search"). Get rid of all those services, it's very important. Get rid of all the software updaters aswell (acrobat, java and all), those things start straight off when you turn on the computer.

I have not really disabled those functions. But as I had said, it has always been like this since always and my playing times always diminished as I progressed. With patch 0.85 times have dropped even more. But suddenly, about 30 or 40 days ago, times began to worsen (in the same proportion as my internet was getting worse).

In addition, there have been times when I played with several things open and the gameplay was little affected. That's why I think the problem is the instability of the connection. I'll keep hoping for this to get better. (IMG:[invalid] style_emoticons/default/rolleyes.gif)

There isn't any mean in the entire universe to use a software different from vlc.
Ever.

I already used VLC, but I gave up because in certain video files the image began to show defects. The same files played smoothly in Windows Media Player and Media Player Classic.

As the responsible for a fansubber here would say: "Every time you use VLC a loli dies." (IMG:[invalid] style_emoticons/default/tongue.gif)

K-Lite Codec Pack in 2017? Guhhh

I've been using it for years and it's never been a problem.

Got a Gold Star.

edit: now to start filling up new Monster Slots...

Congratulations!!! (IMG:[invalid] style_emoticons/default/biggrin.gif)

These 50% that I referred to is the maximum peak that can occur in an instant. Usually it varies between 20% and 40%. Also, sometimes I leave more than one open tab in the browser, or else I open the notepad and the calculator.

both of them being well-known ram-eaters (IMG:[invalid] style_emoticons/default/duck.gif)
you sure you don't visit Flash-based sites meanwhile? or some software fails to close properly?

I still use the good old Winamp. (IMG:[invalid] style_emoticons/default/happy.gif) I like the options the program has, in addition to being accustomed for several years.

ah, winamp... (IMG:[invalid] style_emoticons/default/wub.gif)

are its plugins still updated, btw?

I've been IWíng my Charged Black Pants ... at least 15 round at Pfudor... only 2 times 1 jug.

Tomorrow is another day. But these pants play hard to get! Let me rephrase that: It's hard to get my hands on a good pair of Jugs. ...It may get even harder when I do get my hand on a pair of jugs, now that I think about it.

As you can see I'm still looking for the perfect pun. Such good ingredients: pants, jugs, getting into it... Anyone feel like helping?

How about:

Yes! Another day of IWing my Black Pants. Can't wait to get into my pants and get my hands dirty!

both of them being well-known ram-eaters (IMG:[invalid] style_emoticons/default/duck.gif)

Sometimes I'm doing something else and I forget to close some program. (IMG:[invalid] style_emoticons/default/heh.gif)

you sure you don't visit Flash-based sites meanwhile?

Maybe, but in a few cases (when it's too bad I open the speedtest.net page to check; I make tests in sequence). Most of the times there are only 3 tabs: forum, altverse and translator.

or some software fails to close properly?

I think not because I get the "Windows Task Manager" open to check any anomaly in CPU and memory consumption . This type of problem occurred more when I opened many tabs using Firefox. Memory consumption is higher compared to other browsers (opening the same pages).

ah, winamp... (IMG:[invalid] style_emoticons/default/wub.gif)

are its plugins still updated, btw?

As far as I know, unfortunately this program does not receive any more updates. And it's been a long time. (IMG:[invalid] style_emoticons/default/sad.gif) The last version seems to be 5.666 (I have the 5.63).

Ah, yes. Fair enough. Assign an ip for your pc into your lan. Something like 192.168.0.2 (these are local ips, so it's fine to write them). Again, check your manual for how to proceed.
But in case you have other pcs, these the chance you'have to fix those ones as well to avoid conflicts. Or at least to exclude the above mentioned one.

Hmm my question is can you open any port number you desire by simply changing router settings or only your ISP have that authority ?

Hmm my question is can you open any port number you desire by simply changing router settings or only your ISP have that authority ?

you can. single ports, for single softwares, for whichever protocol and such. i guess that ISP merely has a bit more authority than you.

this is an example from a router similar to mine:

(IMG:[www.edimax.us] http://www.edimax.us/html/Faq/FAQ_BR6104k_files/FAQ_BR4.jpg)

Hmm my question is can you open any port number you desire by simply changing router settings or only your ISP have that authority ?

First check ,if your ISP has given you a public IP or private.
In case of public it is simply not possible to do H@H even after configuring everything router setting , Port number etc.

And if it is private . Than congrats because issue can be resolved.

This post has been edited by ALL_MIGHT: Sep 28 2017, 17:15

you can. single ports, for single softwares, for whichever protocol and such. i guess that ISP merely has a bit more authority than you.

this is an example from a router similar to mine:

(IMG:[www.edimax.us] http://www.edimax.us/html/Faq/FAQ_BR6104k_files/FAQ_BR4.jpg)

There is no port forwarding option in my d-link router all it has are these options in the LEFT side - [m.setuprouter.com] http://m.setuprouter.com/router/dlink/dir-...86250-large.jpg

First check ,if your ISP has given you a public IP or private.
In case of public it is simply not possible to do H@H even after configuring everything router setting , Port number etc.

And if it is private . Than congrats because issue can be resolved.

And how can I find out whether its private or public IP if u don't mind asking ?

This post has been edited by xcaliber9999: Sep 28 2017, 20:22

There is no port forwarding option in my d-link router all it has are these options in the LEFT side - [m.setuprouter.com] http://m.setuprouter.com/router/dlink/dir-...86250-large.jpg

i fail to see the difference, if you allow me. names may slightly differ. but usually when you find a menu which allows you to specify port ranges and protocols, it's that one.

There is no port forwarding option in my d-link router all it has are these options in the LEFT side - [m.setuprouter.com] http://m.setuprouter.com/router/dlink/dir-...86250-large.jpg
And how can I find out whether its private or public IP if u don't mind asking ?

You were on the very page that is used to "port forward". That's only a trivial name. A more proper calling should be "NAT/PAT rules", which stands for "network address translation/port address translation rules". That's basic router settings: all routers do that, that's their very purpose.

i fail to see the difference, if you allow me. names may slightly differ. but usually when you find a menu which allows you to specify port ranges and protocols, it's that one.

You were on the very page that is used to "port forward". That's only a trivial name. A more proper calling should be "NAT/PAT rules", which stands for "network address translation/port address translation rules". That's basic router settings: all routers do that, that's their very purpose.

Are you guys sure that is where port forwarding happens ?

Is this section useless than ? - [imgur.com] https://imgur.com/a/6XkQD

This post has been edited by xcaliber9999: Sep 28 2017, 20:45